|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch January 2008 FSA3157B Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch Features Useful in Both Analog and Digital Applications Ultra-small, MicroPakTM Leadless Package Low On Resistance: <10 Typical at 3.3V VCC Broad VCC Operating Range: 1.65V to 5.5V Rail-to-rail Signal Handling Power-down, High-impedance Control Input Over-voltage Tolerance of Control Input to 7.0V Break-before-make Enable Circuitry 250MHz, 3dB Bandwidth Description The FSA3157B is a high-performance, single-pole / double-throw (SPDT) analog switch or 2:1 multiplexer / de-multiplexer bus switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high-speed enable and disable times and low on resistance. The break-beforemake select circuitry prevents disruption of signals on the B Port due to both switches temporarily being enabled during select pin switching. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The control input tolerates voltages up to 5.5V, independent of the VCC operating range. Ordering Information Part Number FSA3157BL6X Operating Temperature Range -40 to +85C Top Mark 7G Package 6-Lead, MicroPak 1.0mm Wide Package Packing Method 5000 Units on Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. MicroPakTM is a trademark of Fairchild Semiconductor Corporation. Figure 1. Logic Symbol Figure 2. Analog Symbol (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch Pin Configuration Figure 3. Pad Assignments Function Table Input (S) Logic Level LOW Logic Level HIGH Function B0 Connected to A B1 Connected to A Pin Descriptions Pin A, B0, B1 S Description Data Ports Control Input (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 2 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VS VIN IIK IOUT ICC/IGND TSTG TJ TL PD ESD Supply Voltage DC Switch Voltage DC Input Voltage (1) (1) Parameter Min. -0.5 -0.5 -0.5 -50 Max. 7.0 VCC+0.5 7.0 128 100 Unit V V V mA mA mA C C C mW kV DC Input Diode Current at VIN < 0V DC Output Current DC VCC or Ground Current Storage Temperature Range Junction Temperature Under Bias Junction Lead Temperature (Soldering, 10 seconds) Power Dissipation at +85C Human Body Model, JESD22-A114 -65 +150 +150 +260 180 4 Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC VIN VIN VOUT TA tr , tf Control Input Voltage Switch Input Voltage Output Voltage (2) Parameter Supply Voltage Operating (2) (2) Min. 1.65 0 0 0 -40 Max. 5.50 VCC VCC VCC +85 10 5 Unit V V v V C ns/V Operating Temperature Input Rise and Fall Time Control Input VCC=2.3V-3.6V Control Input VCC=4.5V-5.5V 0 0 Note: 2. Control input must be held HIGH or LOW; it must not float. (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 3 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch Electrical Characteristics Symbol Parameter Conditions VCC (V) 1.65 to 1.95 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 0 VIN 5.5V 0 A, B VCC VIN=0V, IO=30mA VIN=2.4V, IO=-30mA VIN=4.5V, IO=-30mA VIN=0V, IO=24mA RON Switch On Resistance(3) VIN=3V, IO=-24mA VIN=0V, IO=8mA VIN=2.3V,IO=-8mA VIN=0V, IO=4mA VIN=1.65V, IO=-4mA ICC Quiescent Supply Current: All Channels On or Off Analog Signal Range IA=-30mA, 0 VBn VCC On Resistance Over Signal Range(3,7) IA=-24mA, 0 VBn VCC IA=-8mA, 0 VBn VCC IA=-4mA, 0 VBn VCC IA=-30mA, VBn=3.15 RON On Resistance Match Between Channels(3,4) IA=-24mA, VBn 2.1 IA=-8mA, VBn=1.6 IA=-4mA, VBn=1.15 IA=-30mA, 0 VBn VCC Rflat On Resistance Flatness(3,4,6) IA=-24mA, 0 VBn VCC IA=-8mA, 0 VBn VCC IA=-4mA, 0 VBn VCC VIN=VCC or GND IOUT=0 3.0 2.3 1.65 4.5 0 to 5.5 1.65 to 5.5 0.05 0.05 3.0 5.0 7.0 4.0 10.0 5.0 13.0 6.5 17.0 TA=+25C Min. 0.75VCC 0.7VCC 0.25VCC 0.3VCC 0.1 0.1 7.0 12.0 15.0 9.0 20.0 12.0 30.0 20.0 50.0 1.0 TA=-40 to +85C Max. Min. 0.75VCC Typ. Max. Units VIH High Level Input Voltage V 0.7VCC 0.25VCC V 0.3VCC 1 1 7.0 12.0 15.0 9.0 20.0 12.0 30.0 20.0 50.0 10.0 A A A VIL Low Level Input Voltage Input Leakage Current Off State Leakage Current IIN IOFF 5.5 VCC 4.5 3.0 2.3 1.65 4.5 3.0 2.3 1.65 5.0 3.0 2.5 1.8 0 VCC 0 VCC 25.0 50.0 V RRANGE 100.0 300 0.15 0.2 0.5 0.50 6.0 12.0 28.0 125 Notes: 3. Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the two (A or B Ports) 4. Parameter is characterized, but not tested in production. 5. RON = RON maximum- RON minimum measured at identical VCC, temperature, and voltage levels. 6. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. 7. Guaranteed by design. (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 4 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch AC Electrical Characteristics Symbol Parameter Conditions VCC (V) Min. 1.65 to 1.95 tPLH, tPLH Propagation Delay Bus-to-bus(8) VI=OPEN 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Output Enable Time Turn on Time (A to Bn) VI=2x VCC for tPZL VI=0V for tPZH 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Output Disable Time Turn off Time (A Port to B Port) VI=2x VCC for tPLZ VI=0V for tPHZ1. 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to 1.95 tBBM Break-before-Make Time(9) 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Q Charge Injection(9) Off Isolation(10) Crosstalk -3dB Bandwidth Total Harmonic Distortion(9) CL=0.1nF, VGEN=0V RGEN=0 OIRR Xtalk BW THD RL=50, f=10MHz RL=50, f=10MHz RL=50 RL=600, 0.5VPP, f=600Hz to 20KHz 5.0 3.3 1.65 to 5.5 1.65 to 5.5 1.65 to 5.5 5.000 7.0 3.5 2.5 1.7 3.0 2.0 1.5 0.8 0.5 0.5 0.5 0.5 7.0 3.0 -57.0 -54.0 250 .011 dB % dB Figure 14 Figure 15 Figure 18 TA=+25C Typ. Max. 3.5 1.2 0.8 0.3 23.0 13.0 6.9 5.2 12.5 7.0 5.0 3.5 TA=-40 to +85C Min. Max. 3.5 1.2 0.8 0.3 24.0 14.0 7.6 5.7 13.0 7.5 5.3 3.8 0.5 0.5 0.5 0.5 Units Figure ns Figure 10 Figure 11 tPZL, tPZH ns Figure 10 Figure 11 tPLZ, tPHZ ns Figure 10 Figure 11 ns Figure 12 pC Figure 13 Notes: 8. This parameter is guaranteed by design but not tested. The bus switch contributes no propagation delay other than the RC delay of the on resistance of the switch and the 50pF load capacitance, when driven by an ideal voltage source (zero output impedance). 9. Guaranteed by design. 10. Off Isolation = 20 log10 [VA / VBn]. Capacitance TA = +25C, f=1MHz. Capacitance is characterized, but not tested in production. Symbol CIN CIO-B CIOA-ON Parameter Control Pin Input Capacitance B Port Off Capacitance A Port Capacitance when Switch is Enabled Conditions VCC=0V VCC=5.0V VCC=5.0V Typ. 2.3 6.5 18.5 Max. Units pF pF pF Figure Figure 16 Figure 17 (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 5 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch Typical Performance Characteristics Figure 4. Off Isolation, VCC-1.65V Figure 5. Off Isolation, VCC-5. 5V Figure 6. Crosstalk, VCC=1.65V Figure 7. Crosstalk, VCC=5.5V Figure 8. Bandwidth, VCC=1.65V Figure 9. Bandwidth, VCC=5.5V (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 6 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch AC Loading and Waveforms Figure 10. AC Test Circuit Figure 11. AC Waveforms Figure 12. Break-before-make Interval Timing (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 7 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch AC Loading and Waveforms (Continued) Figure 13. Charge Injection Test Figure 14. Off Isolation Figure 15. Crosstalk Figure 16. Channel Off Capacitance Figure 17. Channel On Capacitance Figure 18. Bandwidth (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 8 FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch Physical Dimensions Figure 19. 6-Lead, MircoPakTM 1.0mm Wide Package Note: click here for tape and reel specifcations, available at: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 www.fairchildsemi.com 9 www.fairchildsemi.com FSA3157B -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch (c) 2007 Fairchild Semiconductor Corporation FSA3157B Rev. 1.0.2 10 |
Price & Availability of FSA3157B |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |